Finally! Freshwater Flushing of Your Inboard is as Simple as Connecting a Garden Hose!
Flush Pro™ valves offer one of the easiest to use flushing systems available for inboard engines. Simply unscrew the Flush Pro™ cap, connect a standard garden hose, turn on the water and start your engine. The Flush Pro™ valve automatically pulls fresh water into the boat's cooling system - even if the boat is in the water - flushing out the entire cooling system with fresh water. When done, shut off the engine, turn off & disconnect the hose and replace the Flush Pro™ cap. Your engine is flushed.
Flush Pro™ also makes winterizing easy. Simply close your seacock after the system is drained, take off the Flush Pro™ cap & drop the 5/8" winterizing fitting into the Flush Pro™ valve. Insert one end of a 5/8" tube into the fitting and the other end into your antifreeze. Start your engine & run until the proper amount of antifreeze is sucked into the engine. Remove the winterizing fitting, replace the cap on the Flush Pro™ valve & you're ready for below freezing temperatures.
Like all Perko products, Flush Pro™ valves are made in the USA.
Flush Pro™ Operation Illustration
|Include||For Hose Size Inches||Dealer Pkg. 1 Pc.||OEM Bulk Pkg. 5 Pcs.||Ship Wt. Carton Lbs. DP/OEM Bulk Pkg.|
|Valve & Kit||5/8||0457DP4||0457004||2.9/11.5|
|Valve & Kit||1||0457DP6||0457006||3.0/11.6|
|Valve & Kit||1-1/4||0457DP7||0457007||3.1/11.7|
Instructions & Resources