We have discovered a material problem that can result in a brittle area on the flange of several of our plastic body fuel fills. The result is that the flange can crack when the mounting screws are tightened. The cause of the problem has been traced back to the material itself, not an in-house Perko process. These fills affected were manufactured after 4/12/11 and in May. They can be identified by the date code molded on the side of the fill. See the photographs below for the location of the date code, which tells when the fill was manufactured.
If you have one of these fills, please return it to us immediately. If it has been installed on a boat, it must be removed and returned.
All fuel variations of the following part numbers are involved…
Contact us at firstname.lastname@example.org or 305-621-7525 for a returned goods authorization code or if you have any questions. Fills should be returned for replacement to:
Ship fills to:
16490 NW 13th Ave.
Miami, FL 33169